Guitar Parts Central :: GPC News Archive

GPC News

Friday, July 29, 2011
This just in!
New parts added to our catalog! We have also received more roller tune-o-matics, Wilkinson Tuners, assortment of guitar knobs, inlays, the infamous "Dual-Action" truss rod (all sizes), neckplates and a lot more! We're also adding a mini concentric dome-knob for all the mini dome-knob lovers... Check back soon for more updates.
Tuesday, March 1, 2011
New parts arrived!
Just received a new shipment of parts in. We are loaded with flush-mount jacks, barrel hardtail guitar bridges, strap buttons, fret wire, pick guards and much more..
Wednesday, February 2, 2011
Delays in shipping

We apologize for any delay in shipment. There have been several power outages, internet outages, and bad weather slowing things down in the midwest over the last several days. we're shipping out as fast as we can, but there may be a delay between the time you place your order and the time it gets shipped.


We are sorry for any inconvenience.

 

Guitar Parts Central staff

Sunday, October 31, 2010
New Stuff
New Stuff coming in: we are restocking our tremolos, our output & flushmount jacks, and many other odds and ends. Also, we are finishing our designs on an American Strat body and neck combo, which will be available soon. We'll have pre-routed Northern Ash bodies and Walnut or Cherry necks. Combine these with our lowest-cost guitar parts available, and you can have a dream guitar for less!
Friday, August 6, 2010
Radius Sanding Blocks...
Radius Sanding Blocks are back! Our CNC machine is up and running, and all back-ordered blocks have shipped. Sorry for the inconvenience, and thanks for your patience.
Tuesday, August 3, 2010
Radius Sanding Blocks...
...are on 'back order' until we can get our CNC machine fixed. One of the stepper motor drive belts got stretched out, and we ordered a new one, but it will be another day or two before we're up and running again. Sorry for the delay. If you've ordered a radius sanding block in the last week or so, hang on tight. We'll get them done as soon as possible.
Sunday, May 30, 2010
New GraphTech parts now in stock!
New GraphTech parts now in stock. We have saddles for Stratocaster, Les Paul and similar guitars. We have nuts for Strat, Tele, Les Paul and Epiphone. All TUSQ XL brand from GraphTech, impregnated with Teflon for better tone, stability and sustain.
Sunday, May 2, 2010
New Parts In:

NOW IN STOCK:  Chrome dome knobs, roller nuts, Les Paul pickups, Fender neck plates.

NEW ITEMS:  P-90s, tele jack cups, pickup rings, zebra humbuckers...and much more.

COMING THIS WEEK:  truss rods, push-pull pots, more pickups, battery boxes, mono bridges...

Sunday, April 18, 2010
Fret files are here!

We now have Gurian fret files available in our 'luthier tools' section.

We're STILL waiting on chrome dome knobs, truss rods, et al. Thanks for your patience, and we're sorry for the delay. We'll have them available as soon as we receive them from our suppliers.

Coming soon: guitar bodies and necks. We have CAD templates for strats and telecasters, and are refining our CNC techniques to get you the best bodies at competitive prices.

Coming soon: better pickup selection. Tesla pickups and/or noiseless strat pickups, more LP pickups, as well as concentric pots and some other electronics goodies.

Saturday, January 30, 2010
Product Updates
Chrome dome knobs, HN001 Fender-sized neckplates, and black mono bridges for bass have all been ordered. We hope to have them available by end March. Thanks for your patience.


Guitar Parts Central is upfront